Spring Fever Garage Sale W/ TONS OF PICS
#1
Spring Fever Garage Sale W/ TONS OF PICS/ NEW Parts Added / Lower Prices !!!
LS1 block freshly decked, bored and honed to 3.905 . This came out of a 99 vette. It was hot tanked and fully cleaned and it also comes with new cam bearings installed. All work was performed by Kehl Tech Performance in CT. They do work for Eastside Performance. I bought this block for $475 before spending money on the machine work. You will not find any machine shop to clean in a hot tank, bore, hone and install new cam bearings for the diffrence in my price. This block is ready to go !
$650 plus shipping - I just spent close to this on the machine work.
KOOKS STAINLESS STEEL 1 3/4 RACE HEADERS USED
http://www.kookscustomheaders.com/show.php?pid=167
These were used by the previous owner on the car that I bought. They are in good shape. But 2 of the bottom tubes on 1 of the headers have dents in them from when the car came down after a wheelie. The other header has some minor scrapes. PICS ARE ON PAGE 2
$625 shipped
98-2002 VFN WS6 4inch Ram Air Bolt on hood, Comes with Factory Grill inserts.
I have a VFN 98-2002 WS6 4inch Ram Air Bolt on hood, Comes with Factory Grill inserts. New it cost $600 plus shipping. It is already painted Black. It is used but in great shape. I'm asking for $500 obo. SOLD TO 2 fast motorsports
LS1 Stock Crank Standard. Never cut. Low miles. Fresh and ready to be dropped in.
$125 Shipped
Stock LS1 balanced rods. Cleaned and Reconditioned by Eddies Valve Grinding in NJ. Ready to go.
$60 shipped
Stock LS1 rods with ARP rod bolts. Used for less than 2k miles.
$100 shipped SOLD TO jow02327
LS2 rods and pistons. Less than 1k miles.
$125 shipped SOLD TO sr71bbjr
Diamond Forged Pistons part #11500. Flat top with -2cc valve reliefs with a .945" floating wrist pin (fits stock rods and stock stroke motors.) Pistons have been used for 2000 street driven miles. Never been sprayed, boosted, or raced on. No interference with valves.
$300 shipped SOLD TO jow02327
ARP Main Stud Kit msk 234-5608 NEW
$160 shipped SOLD TO crzhrs
Clevite Main and Rod bearings for standard cranks. NEW MS-2199p & CB-663p
$95 shipped for both SOLD TO IGNANt
Manley Piston Rings 3.905 bore size. Part # 46107 NEW
$85 shipped
Blueprinted Oil Pump. I bought these from a sponser on here. He told me that they were each on a dyno motor for very low hours. I have 2 pcs.
$90 shipped for each 1 PUMP SOLD TO FRANKSS 1 LEFT.
Rev 1.6 Exhaust Valves for LS1 8 pcs NEW
$50 shipped
Ferrea 1.6 Exhaust Valves for LS1 8 pcs NEW
$70 shipped
SDPC single timing chain for LS1. Part #sd 7140 NEW
$50 shipped
Cometic PHUZION head gaskets for extreme Nitrous or High Boost on a 5.7 LS. New. These are about $200 a piece from a retailer.
$250 shipped
Double Roller Timing Chain. This was just bolted on a motor that was on a stand but was never used.
$70 shipped SOLD TO FRANKSS
Cometic Head Gaskets for a 4.030 bore by .060 thick. New but it was placed on a motor that was on a stand but never used. SOLD TO BlwnLs1GTO
$125 shipped
Summit LS1 H/D Starter. Part # sum-820320. This was bolted on a motor on the engine stand but never used.
$140 shipped SOLD TO RAMPANT
Fidanza LS1 Aluminum Flywheel. Part # 198571 NEW
$310 Shipped SOLD TO Troux
PRO 5.0 Shifter for a F-Body. I used this in my 99 T/A for 1100 miles and less than a year.
$130 shipped SOLD TO Dave 96TA
QA1 F-Body Front Struts. New. Single adj. F-Series
$330 shipped SOLD TO SSAbner
MSD Part # 6010. This is to run a carb on a LS motor. NEW
$280 shipped SOLD TO RAMPANT
Harlan Window switch. Brand New.
$50 shipped.
LS1 Front Timing Cover. I have two of these.
$40 shipped SOLD TO murph6908 1 COVER LEFT.
LS1 Valley Cover. I have two of these.
$50 shipped
6.0 Truck oil pan with pickup tube.
$75 shipped
I have a used F-Body oil pan w/ pickup tube that has been modified to fit 1st Gen F-bodies and possibly G-Bodies.
$225 shipped SOLD TO the-jag-guy
Pushrods. Hardened 7.350x .080. Brand New. I bought these from Roush Racing.
$75 shipped
ALL PRICES ARE obo. NO DIBS. FIRST TO SEND THE $$$ GETS THE PARTS. I ACCEPT PAYPAL. Shipping is for the USA. Other Countries are Extra.
Check my feedback on here and ebay under the same user name and you will see all POSITIVE TRANSACTIONS.
PICS:
BLOCK
http://i264.photobucket.com/albums/i...DSC04993-1.jpg
http://i264.photobucket.com/albums/i...DSC04984-1.jpg
http://i264.photobucket.com/albums/i...DSC04985-1.jpg
http://i264.photobucket.com/albums/i...DSC04983-1.jpg
http://i264.photobucket.com/albums/i...DSC04986-1.jpg
http://i264.photobucket.com/albums/i...DSC04987-1.jpg
http://i264.photobucket.com/albums/i...DSC04988-1.jpg
http://i264.photobucket.com/albums/i...DSC04990-1.jpg
http://i264.photobucket.com/albums/i...DSC04991-1.jpg
http://i264.photobucket.com/albums/i...DSC04992-1.jpg
CRANK
http://i264.photobucket.com/albums/i...DSC04959-1.jpg
http://i264.photobucket.com/albums/i...DSC04960-1.jpg
RODS STOCK
http://i264.photobucket.com/albums/i...U/DSC04965.jpg
http://i264.photobucket.com/albums/i...U/DSC04966.jpg
BLUEPRINTED OIL PUMP
http://i264.photobucket.com/albums/i...U/DSC04970.jpg
REV EXHAUST VALVE 1.6
http://i264.photobucket.com/albums/i...U/DSC04971.jpg
SDPC TIMING CHAIN N-MOTION SINGLE
http://i264.photobucket.com/albums/i...U/DSC04973.jpg
http://i264.photobucket.com/albums/i...U/DSC04974.jpg
HARLAN WINDOW SWITCH
http://i264.photobucket.com/albums/i...U/DSC05027.jpg
FIDANZA ALUMINUM FLYWHEEL
http://i264.photobucket.com/albums/i...U/DSC05011.jpg
http://i264.photobucket.com/albums/i...U/DSC05013.jpg
STOCK 6.0 OIL PAN
http://i264.photobucket.com/albums/i...E/DSC05044.jpg
http://i264.photobucket.com/albums/i...E/DSC05045.jpg
http://i264.photobucket.com/albums/i...E/DSC05047.jpg
http://i264.photobucket.com/albums/i...E/DSC05048.jpg
$650 plus shipping - I just spent close to this on the machine work.
KOOKS STAINLESS STEEL 1 3/4 RACE HEADERS USED
http://www.kookscustomheaders.com/show.php?pid=167
These were used by the previous owner on the car that I bought. They are in good shape. But 2 of the bottom tubes on 1 of the headers have dents in them from when the car came down after a wheelie. The other header has some minor scrapes. PICS ARE ON PAGE 2
$625 shipped
98-2002 VFN WS6 4inch Ram Air Bolt on hood, Comes with Factory Grill inserts.
I have a VFN 98-2002 WS6 4inch Ram Air Bolt on hood, Comes with Factory Grill inserts. New it cost $600 plus shipping. It is already painted Black. It is used but in great shape. I'm asking for $500 obo. SOLD TO 2 fast motorsports
LS1 Stock Crank Standard. Never cut. Low miles. Fresh and ready to be dropped in.
$125 Shipped
Stock LS1 balanced rods. Cleaned and Reconditioned by Eddies Valve Grinding in NJ. Ready to go.
$60 shipped
Stock LS1 rods with ARP rod bolts. Used for less than 2k miles.
$100 shipped SOLD TO jow02327
LS2 rods and pistons. Less than 1k miles.
$125 shipped SOLD TO sr71bbjr
Diamond Forged Pistons part #11500. Flat top with -2cc valve reliefs with a .945" floating wrist pin (fits stock rods and stock stroke motors.) Pistons have been used for 2000 street driven miles. Never been sprayed, boosted, or raced on. No interference with valves.
$300 shipped SOLD TO jow02327
ARP Main Stud Kit msk 234-5608 NEW
$160 shipped SOLD TO crzhrs
Clevite Main and Rod bearings for standard cranks. NEW MS-2199p & CB-663p
$95 shipped for both SOLD TO IGNANt
Manley Piston Rings 3.905 bore size. Part # 46107 NEW
$85 shipped
Blueprinted Oil Pump. I bought these from a sponser on here. He told me that they were each on a dyno motor for very low hours. I have 2 pcs.
$90 shipped for each 1 PUMP SOLD TO FRANKSS 1 LEFT.
Rev 1.6 Exhaust Valves for LS1 8 pcs NEW
$50 shipped
Ferrea 1.6 Exhaust Valves for LS1 8 pcs NEW
$70 shipped
SDPC single timing chain for LS1. Part #sd 7140 NEW
$50 shipped
Cometic PHUZION head gaskets for extreme Nitrous or High Boost on a 5.7 LS. New. These are about $200 a piece from a retailer.
$250 shipped
Double Roller Timing Chain. This was just bolted on a motor that was on a stand but was never used.
$70 shipped SOLD TO FRANKSS
Cometic Head Gaskets for a 4.030 bore by .060 thick. New but it was placed on a motor that was on a stand but never used. SOLD TO BlwnLs1GTO
$125 shipped
Summit LS1 H/D Starter. Part # sum-820320. This was bolted on a motor on the engine stand but never used.
$140 shipped SOLD TO RAMPANT
Fidanza LS1 Aluminum Flywheel. Part # 198571 NEW
$310 Shipped SOLD TO Troux
PRO 5.0 Shifter for a F-Body. I used this in my 99 T/A for 1100 miles and less than a year.
$130 shipped SOLD TO Dave 96TA
QA1 F-Body Front Struts. New. Single adj. F-Series
$330 shipped SOLD TO SSAbner
MSD Part # 6010. This is to run a carb on a LS motor. NEW
$280 shipped SOLD TO RAMPANT
Harlan Window switch. Brand New.
$50 shipped.
LS1 Front Timing Cover. I have two of these.
$40 shipped SOLD TO murph6908 1 COVER LEFT.
LS1 Valley Cover. I have two of these.
$50 shipped
6.0 Truck oil pan with pickup tube.
$75 shipped
I have a used F-Body oil pan w/ pickup tube that has been modified to fit 1st Gen F-bodies and possibly G-Bodies.
$225 shipped SOLD TO the-jag-guy
Pushrods. Hardened 7.350x .080. Brand New. I bought these from Roush Racing.
$75 shipped
ALL PRICES ARE obo. NO DIBS. FIRST TO SEND THE $$$ GETS THE PARTS. I ACCEPT PAYPAL. Shipping is for the USA. Other Countries are Extra.
Check my feedback on here and ebay under the same user name and you will see all POSITIVE TRANSACTIONS.
PICS:
BLOCK
http://i264.photobucket.com/albums/i...DSC04993-1.jpg
http://i264.photobucket.com/albums/i...DSC04984-1.jpg
http://i264.photobucket.com/albums/i...DSC04985-1.jpg
http://i264.photobucket.com/albums/i...DSC04983-1.jpg
http://i264.photobucket.com/albums/i...DSC04986-1.jpg
http://i264.photobucket.com/albums/i...DSC04987-1.jpg
http://i264.photobucket.com/albums/i...DSC04988-1.jpg
http://i264.photobucket.com/albums/i...DSC04990-1.jpg
http://i264.photobucket.com/albums/i...DSC04991-1.jpg
http://i264.photobucket.com/albums/i...DSC04992-1.jpg
CRANK
http://i264.photobucket.com/albums/i...DSC04959-1.jpg
http://i264.photobucket.com/albums/i...DSC04960-1.jpg
RODS STOCK
http://i264.photobucket.com/albums/i...U/DSC04965.jpg
http://i264.photobucket.com/albums/i...U/DSC04966.jpg
BLUEPRINTED OIL PUMP
http://i264.photobucket.com/albums/i...U/DSC04970.jpg
REV EXHAUST VALVE 1.6
http://i264.photobucket.com/albums/i...U/DSC04971.jpg
SDPC TIMING CHAIN N-MOTION SINGLE
http://i264.photobucket.com/albums/i...U/DSC04973.jpg
http://i264.photobucket.com/albums/i...U/DSC04974.jpg
HARLAN WINDOW SWITCH
http://i264.photobucket.com/albums/i...U/DSC05027.jpg
FIDANZA ALUMINUM FLYWHEEL
http://i264.photobucket.com/albums/i...U/DSC05011.jpg
http://i264.photobucket.com/albums/i...U/DSC05013.jpg
STOCK 6.0 OIL PAN
http://i264.photobucket.com/albums/i...E/DSC05044.jpg
http://i264.photobucket.com/albums/i...E/DSC05045.jpg
http://i264.photobucket.com/albums/i...E/DSC05047.jpg
http://i264.photobucket.com/albums/i...E/DSC05048.jpg
Last edited by GONEB4U; 04-07-2008 at 09:11 PM.