Gauging Interest: Full Dry Nitrous Kit
04-15-2008, 09:37 PM
#1
Gauging Interest: Full Dry Nitrous Kit Alright guys, I'm second guessing my decisions with going the nitrous route. The stuff scares me to be honest with you.
Heres What I have
Dynotune Dry Nozzle Kit
Jets (50, 75, 100 HP)
1 16ft 4AN Braided Stainless Steel Line (main feed line)
1 2ft 3AN Braided Stainless Steel Line (from solenoid to nozzle)
2 Dynotune Nitrous Solenoids (One for Nitrous one for Purge)
1 Dynotune 10lb Black Bottle with mottle mounted pressure gauge
1 Dynotune Nitrous Filter
1 Dynotune Bottle Warmer, with a automatic pressure maintaining switch
1 Dynotune RPM Activated Window switch
1 Nitro Daves Transmission Tunnel Bottle Mount
1 nitrous switch panel that fits in the front of the center console made by Beer66C5 on this forum. It has a hole for a 2 1/16" Gauge, a purge button, a arming switch, and a heater switch.
In this alone I have about 900 bucks. I'm looking to get 600 OBO
On top of this I have a AEM UEGO Wideband Gauge/Controller that I can throw in for 175 (New is 270).
This entire kit has seen ONE bottle ran through it. Only thing it will need is the wiring done.
Let me know what you guys think....
Heres What I have
Dynotune Dry Nozzle Kit
Jets (50, 75, 100 HP)
1 16ft 4AN Braided Stainless Steel Line (main feed line)
1 2ft 3AN Braided Stainless Steel Line (from solenoid to nozzle)
2 Dynotune Nitrous Solenoids (One for Nitrous one for Purge)
1 Dynotune 10lb Black Bottle with mottle mounted pressure gauge
1 Dynotune Nitrous Filter
1 Dynotune Bottle Warmer, with a automatic pressure maintaining switch
1 Dynotune RPM Activated Window switch
1 Nitro Daves Transmission Tunnel Bottle Mount
1 nitrous switch panel that fits in the front of the center console made by Beer66C5 on this forum. It has a hole for a 2 1/16" Gauge, a purge button, a arming switch, and a heater switch.
In this alone I have about 900 bucks. I'm looking to get 600 OBO
On top of this I have a AEM UEGO Wideband Gauge/Controller that I can throw in for 175 (New is 270).
This entire kit has seen ONE bottle ran through it. Only thing it will need is the wiring done.
Let me know what you guys think....
Last edited by mattl31; 04-22-2008 at 06:15 PM.
