Ported TB with hole for NX Shark Nozzle
07-27-2008, 06:59 PM
#1
TECH Senior Member
Thread Starter
iTrader: (1)
Join Date: Nov 2001
Location: Waco, TX
Posts: 6,449
Likes: 0
Received 0 Likes
on
0 Posts
Ported TB with hole for NX Shark Nozzle Ported semi-polished inside TB with hole drilled in it to mount an NX shark nozzle. This was from my '98. Blade has a 3/16" hole (slightly larger than stock, drilled it for my baby cam - MTI B1, 221/221 114 LSA).
I didn't like having the shark nozzle wiggle around in the rubber boot. Mounted in the TB, it's solid and doesn't move around at all.
Blade is stock, shaft is not milled. No sensors or IAC motor.
$75/shipped.
I didn't like having the shark nozzle wiggle around in the rubber boot. Mounted in the TB, it's solid and doesn't move around at all.
Blade is stock, shaft is not milled. No sensors or IAC motor.
$75/shipped.
