FS: Modded LS1 Longblock (+) Central Florida
#1
11 Second Club
Thread Starter
iTrader: (1)
Join Date: Jun 2004
Location: Ocala, FL
Posts: 61
Likes: 0
Received 0 Likes
on
0 Posts
FS: Modded LS1 Longblock (+) Central Florida
My new motor is in so and my famous LS1 "Touched by the hands of God" has to go to a new home. It has had Mobile 1 in in since day 1 and has been maintained to the highest standard ever since. I guess it's my OCD . . .
This motor comes with a Futural Motorsports F10 Cam (228 / .576 on a 112LSA), 918 springs (good ones) Chromoly pushrods, retainers, locks, ect. It made 380 rwhp on a 104 degree Florida day and would get me 12.60s in the 1/4 on a 1.8 60ft (3815 race weight). Motor had 68K and the cam and supporting cam mods had 23K on it. Always tuned by Formato and never overreved thanks to its 6199rpm limiter and my great driving.
We used a few things for the swap and here is a list of what you would have to get to make it complete:
Stock intake manifold
Engine valley cover
Alternator + bracket & brace
Starter
ECU/PCM + engine harness
MAF
Crank Pulley and bolt
Coil packs, brackets, wires
Valve covers + gaskets
Oil pan (of your choice)
Crank, cam, knock (x2) and coolent temp sensors
This is about $800 in new/used parts.
$2250.00. Price reduced to move it!
Motor is sealed for obvious reasons:
Local pickup preferred. Contact me via e-mail: max120ft@yahoo.com
This motor comes with a Futural Motorsports F10 Cam (228 / .576 on a 112LSA), 918 springs (good ones) Chromoly pushrods, retainers, locks, ect. It made 380 rwhp on a 104 degree Florida day and would get me 12.60s in the 1/4 on a 1.8 60ft (3815 race weight). Motor had 68K and the cam and supporting cam mods had 23K on it. Always tuned by Formato and never overreved thanks to its 6199rpm limiter and my great driving.
We used a few things for the swap and here is a list of what you would have to get to make it complete:
Stock intake manifold
Engine valley cover
Alternator + bracket & brace
Starter
ECU/PCM + engine harness
MAF
Crank Pulley and bolt
Coil packs, brackets, wires
Valve covers + gaskets
Oil pan (of your choice)
Crank, cam, knock (x2) and coolent temp sensors
This is about $800 in new/used parts.
$2250.00. Price reduced to move it!
Motor is sealed for obvious reasons:
Local pickup preferred. Contact me via e-mail: max120ft@yahoo.com