A&A C5 ProCharger Kit with TONS of Extras, Meth, Gauges, etc.
08-04-2008, 10:41 AM
#1
TECH Fanatic
Thread Starter
iTrader: (2)
Join Date: Nov 2001
Location: Columbus, GA
Posts: 1,805
Likes: 0
Received 0 Likes
on
0 Posts
A&A C5 ProCharger Kit with TONS of Extras, Meth, Gauges, etc. Up for sale is this awesome and extremely complete A&A C5 ProCharger supercharger kit off my 2002 C5.
* Main Kit is an A&A Polished Procharger P1SC kit with FMIC (front mount intercooler)
* Halltech air filter
* Greddy oil catch can with neccessary 3/8" lines
* 60# Injectors
* ECS Methanol Injection Kit (windshield washer reservoir) with dash mounted programmable control unit
* Auto-Meter Cobalt #6159 Boost Gauge
* Auto-Meter Cobalt #6163 Fuel PSI Gauge
* Dynojet Wideband Commander Gauge
* TCI Roll Control Line Lock
* A-Pillar Gauge Pod
The kit is off the car and ready to be shipped out. I've got pictures and also a recent video from the car right before the blower was taken off - http://www.youtube.com/watch?v=-JHqwfoO-_s.
Back of the a-pillar gauge pod:
Video here with a quick drive by so you can hear the volume of the whistle and relief valve (it is an intoxicating sound):
http://www.youtube.com/watch?v=-JHqwfoO-_s
This kit in this configuration routinely results in high 500 to low 600 rwhp levels with a good tune and exhaust. The most recent conservative daily driver tune on this car made 596rwhp, but various previous tunes on the same car dyno'd as high as 640rwhp. 12 psi.
Installation guide here: http://www.aandacorvette.com/supercharger_inst.asp
Well over $8,000 in retail goodies here, heck just buying the injectors and A&A stage 2 upgrade kit would be $3,000 shipped and that's in addition to the regular ProCharger kit!
I will take $4,900 firm for everything.
My pm box is almost full, so the best way to reach me about this it to email me through the forum or at johnhelms at firsthorizon dot com with any questions.
Also can get more pictures of anything specific if needed. Thanks! :thumbs:
* Main Kit is an A&A Polished Procharger P1SC kit with FMIC (front mount intercooler)
* Halltech air filter
* Greddy oil catch can with neccessary 3/8" lines
* 60# Injectors
* ECS Methanol Injection Kit (windshield washer reservoir) with dash mounted programmable control unit
* Auto-Meter Cobalt #6159 Boost Gauge
* Auto-Meter Cobalt #6163 Fuel PSI Gauge
* Dynojet Wideband Commander Gauge
* TCI Roll Control Line Lock
* A-Pillar Gauge Pod
The kit is off the car and ready to be shipped out. I've got pictures and also a recent video from the car right before the blower was taken off - http://www.youtube.com/watch?v=-JHqwfoO-_s.
Back of the a-pillar gauge pod:
Video here with a quick drive by so you can hear the volume of the whistle and relief valve (it is an intoxicating sound):
http://www.youtube.com/watch?v=-JHqwfoO-_s
This kit in this configuration routinely results in high 500 to low 600 rwhp levels with a good tune and exhaust. The most recent conservative daily driver tune on this car made 596rwhp, but various previous tunes on the same car dyno'd as high as 640rwhp. 12 psi.
Installation guide here: http://www.aandacorvette.com/supercharger_inst.asp
Well over $8,000 in retail goodies here, heck just buying the injectors and A&A stage 2 upgrade kit would be $3,000 shipped and that's in addition to the regular ProCharger kit!
I will take $4,900 firm for everything.
My pm box is almost full, so the best way to reach me about this it to email me through the forum or at johnhelms at firsthorizon dot com with any questions.
Also can get more pictures of anything specific if needed. Thanks! :thumbs:
