dsrour

would this be a good street motor? By that I mean not a lot of compromises compared w/ stock in terms of every day driveability. thanks

Dragaholic

iTrader: (180)

It can make for a strong street motor, but you won't be able to run pump gas with it unless you reduced the compression.

on2

iTrader: (4)

morels are sold?

dsrour

Thanks, I wasnt sure how to judge driveability just looking at specs. Would piston change be best way to lower compression?

firefighting1101

iTrader: (48)

$50 for the wheel?

98Camarod

iTrader: (43)

Any chance you are selling the hood?

Mean87SS

iTrader: (21)

How big is the converter?

Dragaholic

iTrader: (180)

It depends on how much you want to lower it. Thicker head gaskets, open up the chambers on the cylinder heads or use a set of cylinder heads with bigger chambers than 67cc, or you can change the pistons. I would go in the order that I listed them.

Dragaholic

iTrader: (180)

on2, no, they'r still available.

Mean87SS, it was originally built for 5000 rpms, but when I put in the new motor, it stalled to 5800. So power will have an effect.

on2

iTrader: (4)

got any pics?

i'd like to get them from you.

and how many miles are on them?

any problems with them?

i assume these have no link bars?

Dragaholic

iTrader: (180)

on2, no pics, no link bars, no miles, only 10 passes, 100% feedback.

projectcam

iTrader: (12)

Is that price for a Single or double sway bar?? If its a double I will take it.

3timeracin

iTrader: (15)

I PM'd you back on the cam could you tell me the lobe seperation ? I want it pending if its 112* or more ?

Dragaholic

iTrader: (180)

I'm waiting on an answer from Erik, who's the one who designed the cam. I didn't get a cam card with the cam because it was installed in the longblock. As soon as he sends me a reply, I'll add it to the post and shoot you a PM. Thanks.

Dragaholic

iTrader: (180)

It's a single and I've lowered the price.

3timeracin

iTrader: (15)

cool thanks

3timeracin

iTrader: (15)

would you be willing to trade out your titanium intakes for a set of new Ferrea 6000's and cash ?

Dragaholic

iTrader: (180)

At this time, I would like the keep the heads complete.

3timeracin

iTrader: (15)

let me know if you change your mind ? they will still be complete and you could lower your price a little. The valves I have are brand new Ferrea 6000 for L92 intakes you could just switch them out for the titaniums and I would kick in an extra $200 on top ? let me know if you do change your mind.

Gen414

iTrader: (38)

Man where were you when I started buying parts for my motor!!!! This basically is my motor that is being machined right now Really only difference is the block, Im using the iron.

So, TTT for a good deal on a killer setup. I know, because I know how much I have in my setup