True Duals Question..
True Duals Question.. i havent really read anything on this settup.. it crossd my mind last night when i was setting up a parts list to order in the next few weeks... on my 95 z28 do you think it would sound good with pacesetter lt's to an x pipe with 2 lm2 mufflers? i havent heard of this settup yet and was just kind of curious
Launching!
Joined: Sep 2007
Posts: 208
Likes: 0
From: tacoma, wa
i have pace setter long tubes with true duals. it sounds great. it does however, scrape a little bit on uneven surfaces. if you want to buy a kit that will work with a little cutting, tsp makes a true dual kit for ls1's. i know it fits with minor cutting and a little bending of the exhaust hangers.
True duals is just the way to go!
I get compliments all the time on the way it sounds.. you will like the performance gain also,just remember this,if you are a mildly modded Lt1(small cam etc.) you DO NOT need 3" duals 2-1/2 will work the best...........
I get compliments all the time on the way it sounds.. you will like the performance gain also,just remember this,if you are a mildly modded Lt1(small cam etc.) you DO NOT need 3" duals 2-1/2 will work the best...........
I'd say go with some knock-off Flowmaster single chambers off ebay. Here's how it sounds with those. http://videos.streetfire.net/video/9...ust_192864.htm
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Five Reasons the Camaro Was the Most Pivotal Player in the Pony Car Wars 2.0
Brett Foote
10 Reasons the LS7 Is GM's Most Extreme Naturally Aspirated V8 Engine Ever
Verdad Gallardo
That setup above looks friggin great, why does no one offer this as a set of prebent pipes, which anyone could hook up to the LT of their choice, add whatever mufflers for the straight section and then add tips to the ends? Couldn't a decent exhaust shop get the bends entered in to a computer system somehow to just keep making the same setup? What did it cost if you don't mind me asking?
I have duals after Pacesetters dumped at the rearend.
I hate it. Loud in the car. In the way of my torque arm.Can't just put tail pipes out the back. Mufflers are a worry that low.
I've had 6 other 4th gen cars, all single pipe cat back/dual tail pipes.
I'd like to see a 12 second car run a good y-pipe/cat back that is street friendly and low cost. Swap on a dual header back, X-pipe and tail pipes.
Will the car actually go faster?
Probably gain dead weight with the extra pipes and not much if any power..don't know. A 4" Mufflex y-pipe into a 3 or 3.5" straight pipe into a good cross muffler with 2.5" tail pipes is likley good down to mid 11 second rides.
Anyone want my duals - bring your y-pipe and cat back to my garage ans swap them and it's yours.
I hate it. Loud in the car. In the way of my torque arm.Can't just put tail pipes out the back. Mufflers are a worry that low.
I've had 6 other 4th gen cars, all single pipe cat back/dual tail pipes.
I'd like to see a 12 second car run a good y-pipe/cat back that is street friendly and low cost. Swap on a dual header back, X-pipe and tail pipes.
Will the car actually go faster?
Probably gain dead weight with the extra pipes and not much if any power..don't know. A 4" Mufflex y-pipe into a 3 or 3.5" straight pipe into a good cross muffler with 2.5" tail pipes is likley good down to mid 11 second rides.
Anyone want my duals - bring your y-pipe and cat back to my garage ans swap them and it's yours.
i vote duals all the way...i have pacesetter LT's, summit xpipe and bullets dumped at the rear. i love it. it sounds awesome way better then any ORY setup. i get compliments all the time on it. however it does hang lower then stock and scrape on big speed bumps and such. i also went with 3in pipe instead of the usual 2 1/2 so that also adds to the ground clearence issue. but all in all its totally streetable.
Dont recomend cutouts! 
