solid roller guys?
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Five Reasons the Camaro Was the Most Pivotal Player in the Pony Car Wars 2.0
Brett Foote
10 Reasons the LS7 Is GM's Most Extreme Naturally Aspirated V8 Engine Ever
Verdad Gallardo
im goin wit a set of 200cc AI heads and we wanna switch over to solid roller because i was told that ppl dont run over 450hp on a HR set up and it might not make more then that N/A but on the spray it will and we feel HR will just leave a weak link in the motor and we dont want any weak links
You don't want offset lifters for those heads. Talk to the guys and AI and see what they recommend. You should get this kind of advice from the pros, not a bunch of random people on the internet that may or may not know what they are talking about.
i will do just figured there'd be a few that knew
Yeah you could run standard extreme duty crower lifters for your setup. You don't need offset lifters like I have... I run offset's so that later I have the ability to cut my heads and reweld the intake ports to make them bigger if I choose to.... For now my intake ports are standard AFR 227's..... We went offset so I don't have to re-do shiet later if I decided to completely rework my heads....
but 95% of ppl don't need offset lifters..... the crower extreme duty lifters and the **** tho...
but 95% of ppl don't need offset lifters..... the crower extreme duty lifters and the **** tho...
10 Second Club
Joined: Oct 2007
Posts: 2,630
Likes: 28
Yeah you could run standard extreme duty crower lifters for your setup. You don't need offset lifters like I have... I run offset's so that later I have the ability to cut my heads and reweld the intake ports to make them bigger if I choose to.... For now my intake ports are standard AFR 227's..... We went offset so I don't have to re-do shiet later if I decided to completely rework my heads....
but 95% of ppl don't need offset lifters..... the crower extreme duty lifters and the **** tho...
but 95% of ppl don't need offset lifters..... the crower extreme duty lifters and the **** tho...
i didnt realize the whole offset thing when i asked for a part number ill ask AI still. but ive been lookin into the crower. now do you guys think im goin the right direction switching to solid roller?
not 100% sure... my shaft rockers aren't slight offset. the intakes are VERY offset... the lifter and the pocket where the pushrod meets the lifter is all the way on the side of the lifter body itself.... moved my intake pushrods over like about an 1/8" at least...
I run the new style Comp Endurex. 6000 street miles and God knows how many passes.
If you are gonna streetdrive it, make sure you have 30 psi of oil pressure hot at idle.
Run a GOOD oil, I run SHell Rotella, yeh I know its slowing me down a little. But I have had no cam issues.
If you are gonna streetdrive it, make sure you have 30 psi of oil pressure hot at idle.
Run a GOOD oil, I run SHell Rotella, yeh I know its slowing me down a little. But I have had no cam issues.
