Back from the track, results inside... :(
dude you need a stall, gears, and a better wheel/tire combo.
i think llyod says 3200-3400 stall with LE2's. get 3.73's in the rear. i would definitely go smaller than 18's in the rear, you have absolutely no sidewall
look into 16's with drag radials.
do this then post your new time slip
if you aren't in the 12's, sell me your top end
I had the exact same problem as you last night, i have almost the identical set up but i have the LE emissions cam. my fastest time was 14.00 @ 104 I had terrible 60ft times. I really need to work on my driving and slicks and suspension are next.
Questions as to why running stock gears and stall and STREET TIRES on this setup as all 3 makes Jesus weep.. but I understand on the aspect because I myself am broke. Cracked my stock torque arm 
Thread Starter
TECH Apprentice
iTrader: (2)
Joined: Apr 2005
Posts: 363
Likes: 0
From: Middleton, Wisconsin
Its a street car, money is tight...
Never sunk any money into a converter because I wanted a T56 which I recently purchased just need to get started on it. So that solves one of my problems, next is the gear probably will do a 3.90 then some cheap radials for my shock wheels...
Never sunk any money into a converter because I wanted a T56 which I recently purchased just need to get started on it. So that solves one of my problems, next is the gear probably will do a 3.90 then some cheap radials for my shock wheels...
everyone is focusing on the ET way too much. MPH is a calculation of power-to-weight essentially and ET is the ability to simply utilize that available power. his MPH reflecting a bolt-on to very mild cam LT1 not a h/c one. Seeing as you have a mailorder tune I'd say get that car on a dyno and see what happens. stock convertor and shitty tires are holding you back but ET-wise not MPH-wise, better gears will help but they definately won't make up the difference for what you are trapping vs what you should be trapping.
Thread Starter
TECH Apprentice
iTrader: (2)
Joined: Apr 2005
Posts: 363
Likes: 0
From: Middleton, Wisconsin
everyone is focusing on the ET way too much. MPH is a calculation of power-to-weight essentially and ET is the ability to simply utilize that available power. his MPH reflecting a bolt-on to very mild cam LT1 not a h/c one. Seeing as you have a mailorder tune I'd say get that car on a dyno and see what happens. stock convertor and shitty tires are holding you back but ET-wise not MPH-wise, better gears will help but they definately won't make up the difference for what you are trapping vs what you should be trapping.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
