suggestions
Thread Starter
TECH Enthusiast
iTrader: (3)
Joined: Apr 2009
Posts: 572
Likes: 0
From: morristown,tn
suggestions ok i got a 93 ta roller and im getting a 94 z28 complete parts car i noticed that intake is diff mine looks better,and it has a maf sensor,mine dont and i see alot of tunes say 94-97 . so i was wondering if i should swap harness with the 94 or if its even possible? and ill have alot of body parts for sale soon its a hard top and red. thanks guys and girls p.s. im using the motor out of it
The '93 car has no MAF and runs in speed density mode.
The '93 intake and fuel rail is unique to that year with the crossover pipe being in the rear instead of the front of the intake.
Also the '93 car uses a 4L60, unlike the 4L60E (E = electronically controlled) that you find in the '94-'97 cars.
It is possible to swap the '94 wire harness and computer over to the '93 car.
There is a difference which I don't know if it needs to be addressed:
http://shbox.com/1/harness_connector_faces.htm
The '93 intake and fuel rail is unique to that year with the crossover pipe being in the rear instead of the front of the intake.
Also the '93 car uses a 4L60, unlike the 4L60E (E = electronically controlled) that you find in the '94-'97 cars.
It is possible to swap the '94 wire harness and computer over to the '93 car.
There is a difference which I don't know if it needs to be addressed:
http://shbox.com/1/harness_connector_faces.htm
Thread Starter
TECH Enthusiast
iTrader: (3)
Joined: Apr 2009
Posts: 572
Likes: 0
From: morristown,tn
wait so my 93 trans isnt a 4l60e
its not electronic s#$#$ ill keep it speed density my tranny only got 3k thanks alot for that knowledge wait so does it have lock up or no
its not electronic s#$#$ ill keep it speed density my tranny only got 3k thanks alot for that knowledge wait so does it have lock up or no 
