Pulled DTC codes low TPS sensor
Thread Starter
Launching!
Joined: Feb 2005
Posts: 286
Likes: 0
From: SW FLORIDA
Pulled DTC codes low TPS sensor Hey guys. I just scanned the DTC codes for my car and I got a code for low TPS sensor voltage, I checked the wires and it was plugged in and the connector looked good, so I unplugged it to see if it mad ANY difference and nothing, how bad is it for the motor to run without it, I am having some knock and the car is pulling timing. (still needs to be tuned after rebuild) I am going to be learning how to tune it myself but I need to get this fixed before I can start.
Could it be pulling timing because of something related to the TPS sensor?
Also I have a code for the A/C evaporator sensor circuit. Where is this sensor located so I can check/replace it? also where can I find the correct Shrader valve for the low pressure A/C port?
Could it be pulling timing because of something related to the TPS sensor?
Also I have a code for the A/C evaporator sensor circuit. Where is this sensor located so I can check/replace it? also where can I find the correct Shrader valve for the low pressure A/C port?
Thread Starter
Launching!
Joined: Feb 2005
Posts: 286
Likes: 0
From: SW FLORIDA
any Idea about the Evap sensor circuit?
Thread Starter
Launching!
Joined: Feb 2005
Posts: 286
Likes: 0
From: SW FLORIDA
Not the Fuel Evap system the A/C evaporator sensor circuit OBD1 code 71, I sill cant fugure this one out AFAIN the only sensors are the one pressure sensor by the low side fill port and the plug on the compressor.??? I'm stumped
Last edited by Raven97; Apr 30, 2009 at 10:28 AM.
