LT1 Oil Flow
LT1 Oil Flow I have a reman '94 LT1 in my '87 chevy 1/2 ton. Its an AC Delco (aka mexican rebuilt) motor that has I'd say around 60k miles. Its super clean on the inside but has always had a noisey valvetrain. When I put new springs in it I noticed that some of the rockers took a few minutes to get oil. And after towing with it I have a mean lifter tick.
So my question is, did GM cut down on oil flow to the top end of the engine when they designed the LT1? If so, I figure a new set of lifters would be in order since I do have good oil pressure all around. If not, motors gotta come out and investigate it further.
So my question is, did GM cut down on oil flow to the top end of the engine when they designed the LT1? If so, I figure a new set of lifters would be in order since I do have good oil pressure all around. If not, motors gotta come out and investigate it further.
