lt1 computer swap
TECH Veteran
Joined: Dec 2008
Posts: 4,142
Likes: 61
From: Little Rock, AR
You would have to swap the whole engine harness as well and add a MAF. There would be some circuits that you would need to research to get connected into the new harness, too. It's not totally plug and play.
TECH Fanatic
Joined: Jan 2004
Posts: 1,157
Likes: 1
From: Kingfisher Oklahoma
If you have tunercat or LT1 edit you can run the car in SD mode so to stave off the need for the MAF immediately. Also if its a 95 up harness you use you'll need a diff coil. Although the plugs under the dash will all fit together the wiring is not straight through.
