ECM PCM Computer programming
Thread Starter
Teching In
Joined: Apr 2007
Posts: 4
Likes: 0
ECM PCM Computer programming Hello,
Can anybody tell me where I can program my ECM PCM COMPUTER for LT1/LT4 ??
I have already tried so many times with tpis.com but they never respond to any of my emails.
Can somebody help me>>
Thanks.
Can anybody tell me where I can program my ECM PCM COMPUTER for LT1/LT4 ??
I have already tried so many times with tpis.com but they never respond to any of my emails.
Can somebody help me>>
Thanks.
Do it yourself.
Buy a cable that plugs into a laptop.
www.moates.net
then download a program then tune.
that simple.
Start small. Disable EGR, set fans, etc when you get comfortable, add a little timing etc
Buy a cable that plugs into a laptop.
www.moates.net
then download a program then tune.
that simple.
Start small. Disable EGR, set fans, etc when you get comfortable, add a little timing etc
Launching!
Joined: Mar 2003
Posts: 284
Likes: 0
From: Michigan
Buy a OBDI cable from Andrew
http://www.akmcables.com/ic.htm
buy the OBDI tuning program from TC
http://www.tunercat.com/
and have at it
http://www.akmcables.com/ic.htm
buy the OBDI tuning program from TC
http://www.tunercat.com/
and have at it
12 Second Club
Joined: Jun 2005
Posts: 509
Likes: 0
From: Warner Robins Ga
Not to sound like a dick but u need to stop reading ads in the back of magazines or quit listening to whoever is giving you advise. I'm assuming that's why you went with the Hypertech, not once but twice, according to your other post. If you had researched all the different Lt1 boards I doubt you would've found anyone who would've pointed you towards the Hypercrap. As for TPIS, once again if you researched you might have found a few people satisfied with them. Also, if a business would not respond to my emails, after about the 2nd or 3rd email I would have sent an email telling them to kiss my *** and so on.
To get you started, www.tunercats.com Click on links for datalogging programs, I'd recommend Datamasters.
If you want someone else to do the tuning, www.pcmforless.com, www.madz28.com, Ed Wright at www.fastchip.com
There are others but the the 1st 2 sites get mentioned a lot. There's been debate as to who is better. Once again use the search since this stuff has been debated many times over.
To get you started, www.tunercats.com Click on links for datalogging programs, I'd recommend Datamasters.
If you want someone else to do the tuning, www.pcmforless.com, www.madz28.com, Ed Wright at www.fastchip.com
There are others but the the 1st 2 sites get mentioned a lot. There's been debate as to who is better. Once again use the search since this stuff has been debated many times over.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Five Reasons the Camaro Was the Most Pivotal Player in the Pony Car Wars 2.0
Brett Foote
10 Reasons the LS7 Is GM's Most Extreme Naturally Aspirated V8 Engine Ever
Verdad Gallardo There are a number of good tuners all across the country. Then there are a number of POPULAR tuners that people mistake for good.
I have used pcmforless and in hindsight consider that a mistake.
I have used pcmperformance and am happy.
I have loaded madz28 programms for several friends with good results and used him for pcm repair, again happy with that.
In between all that I used another tuner that tends to stay out of the mailorder thing, as I learned more I began to see he had put almost no effort into my programming, which really sucks because he was the most expensive I tried.
Ed Wright is good, far as I know he was the first to offer custom LT1 tuning. Been tuning things WELL longer than many of us have been alive.
I have used pcmforless and in hindsight consider that a mistake.
I have used pcmperformance and am happy.
I have loaded madz28 programms for several friends with good results and used him for pcm repair, again happy with that.
In between all that I used another tuner that tends to stay out of the mailorder thing, as I learned more I began to see he had put almost no effort into my programming, which really sucks because he was the most expensive I tried.
Ed Wright is good, far as I know he was the first to offer custom LT1 tuning. Been tuning things WELL longer than many of us have been alive.
TECH Regular
Joined: Oct 2008
Posts: 430
Likes: 0
From: Bahrain
TPIS once sent me an email regarding an order i was trying to place with them asking me bout the shipping method, so i replied to their email and never heard of them again, kept on sending them several reminders but no respond so ever,,they do have good products but customer servise sucks
computer, ecm, ecmpcm, engine, jose, lt1, pcm, programer, programing, programmer, programming, reprogramming, roadmaster, san, tuning
