Gauge Pods Install [help]
Thread Starter
Staging Lane
Joined: Oct 2008
Posts: 99
Likes: 0
From: Brownsville, texas
Gauge Pods Install [help] All right well as the titel said.
I got a 1994 Lt1 Trans am
My pop's bought me the A pillar Gauge Pods (3 slot)
With these guages.
Vacuum Pressure Gauge
Transmission Temp Gauge
Air / Fuel Ratio Gauge
Im Kinda handy on eletrical.
I was just wondering what i need to install these guages
And maybe some intrustions?
from a website or ANY help will be great.
Thank you for reading
And thanks in Advance.
I got a 1994 Lt1 Trans am
My pop's bought me the A pillar Gauge Pods (3 slot)
With these guages.
Vacuum Pressure Gauge
Transmission Temp Gauge
Air / Fuel Ratio Gauge
Im Kinda handy on eletrical.
I was just wondering what i need to install these guages
And maybe some intrustions?
from a website or ANY help will be great.
Thank you for reading
And thanks in Advance.
wire, butt connectors, electrical tape, ziptips, shrinktubing (depends how **** you are), maybe vacuum line, etc
I'm not 100% on the tranny temp gauge how the taps in, but if you have to drill a hole, better get a drill, fluid, and gasket.
I'm not 100% on the tranny temp gauge how the taps in, but if you have to drill a hole, better get a drill, fluid, and gasket.
Registered User
Joined: Aug 2009
Posts: 5
Likes: 0
From: Oviedo, Fl
I know this isn't for a f-body, but it should help you with the vacuum and tranny temp.
http://www.frontiernet.net/~jmray/F250QuadGauge.htm
http://www.frontiernet.net/~jmray/F250QuadGauge.htm
