Timing chain without pump drive
Thread Starter
Staging Lane
Joined: May 2008
Posts: 70
Likes: 0
From: Washington
Timing chain without pump drive Rebuilding my engine and need to find a part# for the timing set everyone was using that had a Ewp. I took my waterpump drive out and pluged the hole. Also looking for cam sugestions For mild street car. Hot cam?
Teching In
Joined: Feb 2009
Posts: 23
Likes: 0
From: East Tenn
I went back with a stock LT4 chain but many go with the cloyes or extreme duty.
As for cam, get ready.....you're gonna hear alot of opinions on this issue.
IMO, if all you want is a nice little bump in power and you're not trying to squeeze every last bit of HP out of it then the HC is an ok choice for a budget concious individual.
As for cam, get ready.....you're gonna hear alot of opinions on this issue.
IMO, if all you want is a nice little bump in power and you're not trying to squeeze every last bit of HP out of it then the HC is an ok choice for a budget concious individual.
Teching In
Joined: Feb 2009
Posts: 23
Likes: 0
From: East Tenn
Mine is a hotcammed car but its a factory LT4. Headers, pcmforless tune, 4.10s and 3250lbs. 12.30s at 115mph
'most' F bods run 110-112mph with the hotcam from what I have seen but that varies depending on stock/ported heads, other mods.
'most' F bods run 110-112mph with the hotcam from what I have seen but that varies depending on stock/ported heads, other mods.
