Head Porting - DIY
Thread Starter
TECH Resident
Joined: Jul 2009
Posts: 772
Likes: 0
From: Bahrain
Thanks for the points bro. A valve job is a difficult one to get done here, doubt any machine shop can do it.
I will read more into doing the bowl and the valve guide areas before I attempt it so I know what I am exactly going to be doing.
Thanks for the great tips man! I owe you one buddy!
I will read more into doing the bowl and the valve guide areas before I attempt it so I know what I am exactly going to be doing.
Thanks for the great tips man! I owe you one buddy!
Joined: Apr 2008
Posts: 1,169
Likes: 1
From: Born/Raised North East, MD Lived in VA, NC, MI Back in Yorktown, Va
another heads up is make sure your aware of roughly where your water jeackets are. that would really suck to hit one and then you have a trashed set of heads. also remember the less material between your water jackets and the ports the more heat is going to get through. just a lil think to keep in mind
Thread Starter
TECH Resident
Joined: Jul 2009
Posts: 772
Likes: 0
From: Bahrain
another heads up is make sure your aware of roughly where your water jeackets are. that would really suck to hit one and then you have a trashed set of heads. also remember the less material between your water jackets and the ports the more heat is going to get through. just a lil think to keep in mind
