Copper Gaskets???
#1
On The Tree
Thread Starter
Join Date: May 2009
Location: Loris,South Carolina
Posts: 143
Likes: 0
Received 0 Likes
on
0 Posts
Copper Gaskets???
blowed stock gaskets on my 383.. looking at SCE Titan Copper self sealing head gaskets.. anybody using them? and are they really the best?
#4
On The Tree
Thread Starter
Join Date: May 2009
Location: Loris,South Carolina
Posts: 143
Likes: 0
Received 0 Likes
on
0 Posts
i had the heads decked and valve job the whole nine yards when i built my motor.. from the day i first crunk it up it was losing water.. then blowed gaskets and it went through exhaust.. took off the heads took to a friends shop and my drivers head is warped. he thinks they were never decked.. i'm going with after market gaskets cause i dont wanna tear them down again after i put on my 2 stage nos
#7
Village Troll
iTrader: (2)
i had the heads decked and valve job the whole nine yards when i built my motor.. from the day i first crunk it up it was losing water.. then blowed gaskets and it went through exhaust.. took off the heads took to a friends shop and my drivers head is warped. he thinks they were never decked.. i'm going with after market gaskets cause i dont wanna tear them down again after i put on my 2 stage nos
Trending Topics
#8
On The Tree
Thread Starter
Join Date: May 2009
Location: Loris,South Carolina
Posts: 143
Likes: 0
Received 0 Likes
on
0 Posts
got my heads back today and boy.. one was off 5 thousands in the center.. had em decked more.. and i got my SCE gaskets today too.. starting on er tomorrow afternoon.. hopefully have it running by sunday if nothing goes wrong..