llorracs93s10

iTrader: (5)

For all you guys that have them, is there anything that i am missing with these things to keep the side to side movement from happening when they are tightend to specs? It just seems too easy for these RR's to move off the center of the keepers and i am not chancing my $$$ invesement of heads and RR's i just got.

AChotrod

iTrader: (17)

guide plates

RamAir95TA

iTrader: (2)

How can you suggest guideplates when the OP doesn't indicate what type of rocker (self-aligning or non self-aligning) he has?

AChotrod

iTrader: (17)

Because it would seem to me if they are moving that much they are NSA and 99% of people on here buy NSA pro mags. But you may be correct. OP What pro mags do you have?

Turnin20s

iTrader: (12)

I'm with AC, you have to use guide plates if you have NSA rockers.

llorracs93s10

iTrader: (5)

sorry for the wait i was out the door 2 mins after i wrote this, they are the 1302-16 brand pro mags, so they arent the self aligning. So what do i need than?

RamAir95TA

iTrader: (2)

You need hardened guideplates and hardened pushrods with non self-aligning rockers. This requires removal of the rocker studs as well. Unfortunately you already have the rockers, so upgrading to 7/16" studs looks like it's out of the question.

My95Z

iTrader: (8)

Shouldn't the shop you went to have set this up for you, or did you get the RR's yourself?

llorracs93s10

iTrader: (5)

i got them from the shop. Looks like i am going to be caling them today....

mdacton

iTrader: (3)

no way.... if they are non self aligning what would you need guideplates for?

Turnin20s

iTrader: (12)

NSA=not self aligning, meaning you need something to keep them aligned. SA=self aligning, meaning they keep themselves aligned. Reread your post, you kind of answered it yourself

Or was that sarcasm?

aboatguy

Make sure you get guideplates that are suitable for LTX heads some of the sbc guide plates cause a misalignment (geometry issues) I use AI hardened guideplates


Mike

My95Z

iTrader: (8)

Man, you just can't catch a break. They def should have known that though, maybe it just slipped their mind or something...

llorracs93s10

iTrader: (5)

Yea after talking to him he said the guy just grabbed rr's when he asked for them. But i got the guide plates , well my bro does. I hoope to have this running by monday now...

llorracs93s10

iTrader: (5)

Did you have to trim your inner valve covers with these new RR's and bolts?

My95Z

iTrader: (8)

I didn't use those, but I do believe they require a little trimming for clearance.

Beehive springs?

aboatguy

not the CC 918s Pacalloy 1220s

No inner valve covers I have a corvette and they come with composite covers

I broke the drip tabs off, but in hindsite the rockers may have cleared without breaking the drip tabs off. (literally took less than a minute to break the 16 tabs off.

llorracs93s10

iTrader: (5)

Well i got my stuff resolved, i got my steel hardned push rods coming weds and the guide plates i already have. So hpfully by weds the intake, the wiring, the whole front setup and cooling system will be back together and the only thing needed would be the sliding in of the push rods and adjust the rockers and ready to fire up. My new goal is to take the truck home weds night.

AChotrod

iTrader: (17)

Good deal!!

llorracs93s10

iTrader: (5)

yea the only problem is that its still got a damn open diff and 3.42 gears...so its gonna have not traction or get up off the line and im going to have traction issues with no traction bars or DR's.....damn **** cost so damn much money.

These RRs better be gods gift to earth for all this damn money i spent on these and the heads.