iroc1793

iTrader: (3)

i am looking for suggestions on what lifters to buy for my engine. i have a couple collapsed lifters and im just going to replace them all. i am running stock bottom end, ported/polished heads with Ferrea 2.05 intake and 1.56 exhaust valves, matched intake, and a 234/241@50 with a 113 Lsa ( Hydraulic Roller )
.577/.596 lift

it had comp lifters in it previously, bought whole top end from another guy, not sure what the lifters are now other then comp lifters.

thanks guys

StealthFormula

iTrader: (35)

I would recommend picking up some LS7 Lifters. They are about $120 off ebay, scoggin dickey, summit etc.

96blackz28

iTrader: (3)

+2 thats what im going with and I have heard good things about them, plus its GM

Z28Camaro30Ann

iTrader: (15)

x3, I have LS7's. They have a higher rev limit. DO IT!!! lol

the_merv

iTrader: (88)

X4..I have them in my Engine aswell..

96blackz28

iTrader: (3)

Merv is that 408 done yet? And comment on my post about 2bolt to a 4bolt!

the_merv

iTrader: (88)

Not done yet..waiting on the Machine Shop..

Everyone around here is blowing up their Dirt Cars so the Shop is backed up..I guess that's the business to be in..

RamAir95TA

iTrader: (2)

x5. I'd use them again if I had to do it all over again.

dafhturbo

iTrader: (3)

x6 would use them again

iroc1793

iTrader: (3)

okay, thanks guys, i apprecitate the input

the_merv

iTrader: (88)

This is like the first thread everyone agreed in..

James Montigny

iTrader: (13)

You jinxed it.