ohhyea102

iTrader: (1)

i was wondering what kind of heads i should get with this cam cc305 114lsa i plan on running a little n2o maybe 100-150 wet shot. i do plan on geting a converter first. just wondering what kind of heads are good.

James Montigny

iTrader: (13)

Have your stock heads ported.
Either of the links below will hook you up with a great set of heads and a matching cam if you want it.
(You can even pick up a set of used heads for $150-$175 and have them ported then sell yours when you are done if you want to keep downtime to a minimum)

http://www.elliottsportworks.com/lt1.html
http://www.advancedinduction.com/

airfix

iTrader: (30)

Go with stock ported heads. Send yours to Lloyd Elliott and get the LE2 package, you'll be very happy with them and the power they will make.

airfix

iTrader: (30)

haha, beat me to it.

ohhyea102

iTrader: (1)

the heads are stock i was just wondering if just porting them would do the trick or if i needed a aftermarket set.
thanks for the help.

BLK,97,T/A,M-6

The stock heads, ported, will be more efficient than a set of off the shelf aftermarket heads. If you got the money, get a good set of aftermarket heads and then have them ported. I paid Lloyd 1950 for his LE2 heads, a great cam, and he ported my intake. Not to mention the entire valvetrain was replaced. 2.02 intake 1.58 exhaust and patriot gold extreme springs. I bielieve the valve locks are also titanium but I could be wrong. Lloyd also has extremely good customer service, he always answers the phone. He even explained how to set the valve lash to me. I have heard good things about AI as well, but have not done any buisness with them.

myltwon

iTrader: (1)

LE package

like ^ said Lloyd's customer service is bad ***

StealthFormula

iTrader: (35)

If you already have that cam and it's not installed I would sell it and go with a custom grind from whoever you have port the heads. The old technology cc305 will be done quite a bit on power vs. a custom grind matched to your setup. Just a heads up to squeeze the most out of your setup!

ohhyea102

iTrader: (1)

thanks for all the help after basic i am going to give Lloyd a call and get one of the head cam kit.

dlk1950

Good choice....What I should have done.

chavez885

iTrader: (12)

I see you're in OK, where at exactly?

ohhyea102

iTrader: (1)

i live in stillwater.

BLK,97,T/A,M-6

Have him grind on your intake too right away. For 200 bucks theres no point in leaving a relatively substantial chunck of power on the table.