need fast help
Thread Starter
On The Tree
Joined: Sep 2008
Posts: 100
Likes: 0
need fast help Ok my window has stopped and is all the way down. Is there a way to take it off the motor and prop it up til i can get a new motor Please i need this now been plastic bag and duck taping it ll day wit the rain 
TECH Veteran
Joined: Dec 2008
Posts: 4,147
Likes: 62
From: Little Rock, AR
You might be able to force it up if you can grab the window or push it up with the door panel off. If you remove the motor, you should be able to push it up and then you could put the motor back in to hold it up until you are ready to fix it.
!!!! If you are working with it inside the door, don't let it fall back down and mash your fingers or arm.
!!!! If you are working with it inside the door, don't let it fall back down and mash your fingers or arm.
Thread Starter
On The Tree
Joined: Sep 2008
Posts: 100
Likes: 0
do you know where the bolts are on the motor to get it off or is it rivets because i screwed i dont have a rivet tool here just more for school first day and window stops working but class was awesome and thanks for the advice
Trending Topics
TECH Veteran
Joined: Dec 2008
Posts: 4,147
Likes: 62
From: Little Rock, AR
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
hammer the teeth to get it to turn while someone pulls up on the window. I don't mean hammer the motor i mean stick like a flathead in the motor and hammer it to turn. this is how I did mine for a temp. fix untill I bought the motor.