Clutch disc replacment?
Thread Starter
TECH Fanatic
iTrader: (7)
Joined: Oct 2007
Posts: 1,177
Likes: 1
From: Little Rock, Ar
Clutch disc replacment? I just installed a SPEC 2 clutch RECENTLY and after the first trip to the track my clutch pedal is at the top of the pedal.. just like the time before when my clutch went out.. I plan on just replacing the disc and reusing the SPEC PP...
Im DEF NOT going back with a SPEC disc, considering it only lasted me less than 5k miles..
What disc should I go with?
K Mack
Im DEF NOT going back with a SPEC disc, considering it only lasted me less than 5k miles..
What disc should I go with?
K Mack
Spec 2 isn't a puck design right?
Surprised, I think most people recommend the Mcleaud(can't ever spell that) disc.
I'm running a custom clutch from Tampa Clutch Supply. Modified Hays pressure plate, 6 puck full metallic clutch disc.
I told them what I plan to make at the wheels and they built a clutch to go beyond that. Perhaps shop around and see if someone will custom make you one, you might be surprised at how affordable that route is.
Surprised, I think most people recommend the Mcleaud(can't ever spell that) disc.
I'm running a custom clutch from Tampa Clutch Supply. Modified Hays pressure plate, 6 puck full metallic clutch disc.
I told them what I plan to make at the wheels and they built a clutch to go beyond that. Perhaps shop around and see if someone will custom make you one, you might be surprised at how affordable that route is.
Spec 2 isn't a puck design right?
Surprised, I think most people recommend the Mcleaud(can't ever spell that) disc.
I'm running a custom clutch from Tampa Clutch Supply. Modified Hays pressure plate, 6 puck full metallic clutch disc.
I told them what I plan to make at the wheels and they built a clutch to go beyond that. Perhaps shop around and see if someone will custom make you one, you might be surprised at how affordable that route is.
Surprised, I think most people recommend the Mcleaud(can't ever spell that) disc.
I'm running a custom clutch from Tampa Clutch Supply. Modified Hays pressure plate, 6 puck full metallic clutch disc.
I told them what I plan to make at the wheels and they built a clutch to go beyond that. Perhaps shop around and see if someone will custom make you one, you might be surprised at how affordable that route is.
FormerVendor
Joined: Dec 2008
Posts: 287
Likes: 0
From: Anaheim, Ca
The one listed above is good to 500 HP and is listed in our Super Street Pro kit. This disc is a Organic/Ceramic material. If that is not your speed we also offer a organic/organic disc thats good for 400hp P/N 261171.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
