Windage tray?s
#22
9 Second Club
iTrader: (3)
Join Date: Nov 2006
Location: Goochland, Va.
Posts: 644
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I run the milodon, They have an ARP stud kit available thats adjustable.
I adjusted mine out and have never had any issues at all, same bearing 8k and over 300 passes they are still like new.
From reading a few replies it seems alot of you have a serious misconseption of what windage is and how oil control works and whats its worth. I would do a little research b/c there is some power to be had and its a very cheap power gain.
I also use a oil deflecter at the rear of the pump to keep oil from climbing
I adjusted mine out and have never had any issues at all, same bearing 8k and over 300 passes they are still like new.
From reading a few replies it seems alot of you have a serious misconseption of what windage is and how oil control works and whats its worth. I would do a little research b/c there is some power to be had and its a very cheap power gain.
I also use a oil deflecter at the rear of the pump to keep oil from climbing
#23
TECH Addict
iTrader: (8)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
**** WINDAGE TRAYS!!! my motor lasted a little longer cause i didnt run my windage tray when my oil pump took a **** the oil was still sloshing up on the crank and did fine for me to get it home. i fully believe if i was running a windage tray i wouldve trashed my motor.