I'm in the process of installing a set of 94 pm rods out of my camaro into a oldschoool smallblock 350. My question is are the lt1 rods offset like the smallblock rods?? Which side faces outside of the motor. The side with the bearing notches or do they face inside??

Thanks,

 

Yes, I did it on a 1970 small block. Took the rods out of my 95. Look at the rods closely, there is a flat side and a chamfered side. Flat goes rod to rod and the chamfered side goes towards the crank..

 

Yep, do that and you'll be fine.

 

Thanks alot guys!!!