fuel rail covers ?
Thread Starter
TECH Enthusiast
iTrader: (35)
Joined: Jun 2008
Posts: 729
Likes: 0
From: mesa,arizona
fuel rail covers ? i need to see what modifications needs to be done to my fuel rail covers to get them to fit ?? i purchased some new ones from ebay if anyone has done this let me know thanks
First make sure you have the right year for your LT1 car and the 4 studs (2 on each side) that screw into the manifold. The passenger side is easy... hold it in place and start to trim where it needs room. I used a dremil tool. The driver side requires more determination... had to unscrew fuel lines mounts to get the studs in and then a lot of trimming. I did major cuts with a hacksaw then cleaned it up with the dremil following the angles on the cover. Then they just snap into the two holes in each fuel rail and the studs. Good luck!
Launching!
Joined: Apr 2008
Posts: 203
Likes: 1
From: Townsend, DE
BTW i m 99% sure they dont fit a 1993.(one of the reasons i dont have em)
Here is the Part Number for the studs you need:
10108672 Fuel Rail Cover Studs
Google the PN and you will find a few places, should be around 5 bucks.
Good Luck!
Here is the Part Number for the studs you need:
10108672 Fuel Rail Cover Studs
Google the PN and you will find a few places, should be around 5 bucks.
Good Luck!
Launching!
Joined: Apr 2008
Posts: 203
Likes: 1
From: Townsend, DE
ahhh, yes i forgot the 1992 vette had the same intake and the vettes deff had the covers. Ecklers has only the right side listed, and I cant find a left side for 1992-93 LT1 anywhere. I guess that is another reason I dont have em. Looks good on your 93!
