timing set ???`s
Thread Starter
Teching In
Joined: Feb 2009
Posts: 34
Likes: 0
From: middle of no where
timing set ???`s im building a lt1 i have a cloyes hex adjust timing set and cant seem to get the opti to set all the way in do i have to grind the nub on the timing set to get it to sit right or is there something else i can do ??? HELP !!!!!
Since you have a 94, your timing chain/sprocket options are very limited. If you want to upgrade to a double roller, you need an electric water pump, 95+ timing cover, 95+ crank hub, 95+ vented optispark, 95+ opti harness, 95+ vacuum lines, and a 95+ camshaft to accept the new pin drive of the optispark.
Trending Topics
Thread Starter
Teching In
Joined: Feb 2009
Posts: 34
Likes: 0
From: middle of no where
i machined the slot in the opti to fit over the dowel. so now it fits perfect nd has less that .01 clearence on either side of the dowel so i ont have to wory about the timing being all over the place
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
