New lt1 build
01-13-2010, 10:03 AM
#1
New lt1 build My buddy has a lt1 and over the winter I rebuilt it for him. I hoping it should have at least 450hp at the wheels, with a little bit of spray. Here are some photos of it to, let me know what you guys think. For the spec I went with 30 over, tpis heads, custom intake with dual feed lines, I think I have 34lb injecters, stock crank, comp cam, and eagle pistons.
Timing cover and all! 
01-13-2010, 10:55 AM
#5
My buddy has a lt1 and over the winter I rebuilt it for him. I hoping it should have at least 450hp at the wheels, with a little bit of spray. Here are some photos of it to, let me know what you guys think. For the spec I went with 30 over, tpis heads, custom intake with dual feed lines, I think I have 34lb injecters, stock crank, comp cam, and eagle pistons.
01-13-2010, 02:42 PM
#6
I have a few different sets, he wanted to have a vortec on it but change roads on me, the yellow set in the photos arent the 34lb ones. The paint is what my buddy wanted, i tried to get him to go with a polished timing cover but you can see i got stucked with chevy orange.
01-13-2010, 09:41 PM
#7
Teching In
Join Date: Jan 2010
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Lt-1 Bored.030
Speed-pro forged aluminum pistons
fresh build
cc302 cam
tpis heads
cc 1.6 rockers
beehive springs
custom chopped manifold
58mm tb
egr delete
hv oilpump
36# injectors accel
Dual feed rails from 94 trans am gt
msd opti
taylor wires
delco plugs
Umi Kmember and full suspension
Hypertech 160' thermostat
As far as paint, well only the blockwas supposed to be painted, not oil pan and timing cover lol.
Speed-pro forged aluminum pistons
fresh build
cc302 cam
tpis heads
cc 1.6 rockers
beehive springs
custom chopped manifold
58mm tb
egr delete
hv oilpump
36# injectors accel
Dual feed rails from 94 trans am gt
msd opti
taylor wires
delco plugs
Umi Kmember and full suspension
Hypertech 160' thermostat
As far as paint, well only the blockwas supposed to be painted, not oil pan and timing cover lol.
