Custom Fuel Rail Covers
Those look really good. Just wondering if you could share what type of aluminum and what gauge thickness. Like could I just go buy a sheet of aluminum from the hardware store. If you don't want to share thats cool.
Thread Starter
TECH Enthusiast
Joined: Mar 2009
Posts: 722
Likes: 0
From: RI
i dont have the measurements off hand, these took me about a good 8 hours to cut and bend and sand all the edges,and make them fit right. i also dont know the gauge or the type of aluminum i used, i had some lying around. what i do know is that they were a bitch to bend, and the aluminum is definitely not flimsy. the ones for my car should hopefully be done with paint tomorrow and im hoping i can get them on tomorrow too
those look just like mine.
Fuel Rail Covers
These are no longer available but look great. These will also help for placing coilpacks if you do the conversions. You might be able to sell them they look good.
Fuel Rail Covers
These are no longer available but look great. These will also help for placing coilpacks if you do the conversions. You might be able to sell them they look good.
i dont have the measurements off hand, these took me about a good 8 hours to cut and bend and sand all the edges,and make them fit right. i also dont know the gauge or the type of aluminum i used, i had some lying around. what i do know is that they were a bitch to bend, and the aluminum is definitely not flimsy. the ones for my car should hopefully be done with paint tomorrow and im hoping i can get them on tomorrow too
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Teching In
Joined: Feb 2010
Posts: 3
Likes: 0
[/IMG] 
Please let all of know if you would be willing to make these to sell. To answer ur question, I think 140 bucks is fair. U said the corvette ones go for 90 and the aluminum ones for 190. Add that and split in half. That should be plenty to cover supplies and ur labor or find the cost in supplies add ten percent and then charge whatever u want for labor. Ur choice really. But nice job
Teching In
Joined: Jun 2010
Posts: 33
Likes: 0
I could totally go for a set of these too, when you determine a price let me know and I will totally hit you up. I would just want a set unpainted like everyone else. I just don't know how much effort/work it takes you. but I am definitely interested so somebody who wants to make some money throw out an offer.
Last edited by atlanta15braves; Jul 3, 2010 at 10:05 AM.