would 52 tb and 30 lb be a good bolt on with my set up that im running?

 

if you have a cam and ported heads on stock injectors then I would think some bigger injectors would be on the top of the list!

 

Injectors are a supplementary modification and won't add any HP by themselves (not to mention you'd need tuning to compensate). With the cam in your signature, the stock ones are fine.

The 52mm throttle body may add a few HP, but depending on the rest of your mods (you don't mention anything other than converter, CAI, heads, and cam - hopefully you have some type of header and exhaust), the money could be spent elsewhere.

 

with my car cam only, and it is a smaller cam than his, my 30# SVOs were at 85% so on 24# injectors you must be working those things like a rented mule with ported heads as well.

 

i ran 37#s on my car, same duration but .600/.600 lift

 

For some reason that doesn't sound right..

 

How high do you spin your motor? I have 24#svo's and i'm at 110% at 6500.

 

I HAVE NOT RAN THE CAR ITS MY CAR THAT IM GETTING READY FOR THE SUMMER BUT I NEED TO KNOW I GOT MY A$$ COVERED WITH THE MODS, SO DO I NEED TO GO BIGGER THAN 30LBS INJECTORS WHAT IS A GOOD SIZE IM NOT RICH AT THIS TIME...LOL

IF ANYBODY HAVE A SET LAYING AROUND THAT WOULD HELP:cry

 

No one can tell you what injector you need until you monitor your duty cycle. I still think the stock ones are fine for right now, but 30# SVOs will work too.

You do realize you need to program the PCM too, right?

 

6600 is where they stopped the pull

 

Hey i got some today on ebay some ford bosch 30lb but the said they really were 32 how true is that i payed 125 for them deal or no deal

 

I going to mail my pcm in to someone

 

you should be fine than.