hitmanws6

iTrader: (20)

I will be running race headers soon and was wondering what you guys have been using to cap off the AIR hose inlet on the airbox. Is there a breather or a plug I can buy? Any help is appreciated.

kierstyn

iTrader: (5)

If you cant find anything I may have something just pm me.

RamAir95TA

iTrader: (2)

Pretty sure I used a 5/8" vacuum cap. Available at any parts store.

96Formula6spd

iTrader: (7)

I just bought some 1/2 inc vacuum hose about 3 inches long and a iron plug from home depot. Put a zip tie or a band clamp on it. Looks ghetto but no leaks and it cost about 2 bucks.

~BuMps AloT~

iTrader: (5)

Go get a vacuum cap from advanced auto parts or auto zone. Look in the help section.

1995blacktattop

iTrader: (2)

when i bought my airbox it had a cap on the air hose port. the hose i used to extend my AIR hose is 3/4. i'm 100% sure of this as i just checked a 1 foot long section leftover from when i added my airbox. I'd think you could get a 3/4 cap like the one i had. unfortunately i think i threw mine away or it was in the box that i sent the old intake stuff in when i sold it so i can't give it to you. I suppose a 5/8 might work if it will slip on there. The one i had was really tight so maybe it was actually a 5/8. the hose itself is 3/4 though.

96silverram

iTrader: (12)

I purchased a vacuum cap package from O'reilly's or NAPA, can't remember which one?

FASTFATBOY

iTrader: (23)

I used a round deal from Lowes that pops into like a round hole. It has little fingers on it that pop through the hole. Then I JB welded it in.

Its chrome steel.

hitmanws6

iTrader: (20)

thanks for the help guys