Leaky Moroso pan?
Thread Starter
TECH Regular
Joined: Jun 2009
Posts: 428
Likes: 0
From: Victoria - Vancouver Island, BC, Canada
Leaky Moroso pan? My T/A has had a massive oil leak ever since I bought it. And I mean MASSIVE. To the point where my old landlord almost wouldn't give me my damage deposit back because I ruined his driveway.
I had put it up on a hoist before to check it out, and it looked like it was coming from just above the drain plug. It's a Moroso pan. We just pulled the engine out to have my 383 built, and I was looking at the pan trying to figure out if one of the welds was cracked. Can't find anything, but is there any way to really check? (with the pan off the engine I mean)
Also, there's another bung in the pan right above the drain plug. This might be where it's leaking from. What the heck is it for?
I had put it up on a hoist before to check it out, and it looked like it was coming from just above the drain plug. It's a Moroso pan. We just pulled the engine out to have my 383 built, and I was looking at the pan trying to figure out if one of the welds was cracked. Can't find anything, but is there any way to really check? (with the pan off the engine I mean)
Also, there's another bung in the pan right above the drain plug. This might be where it's leaking from. What the heck is it for?
Thread Starter
TECH Regular
Joined: Jun 2009
Posts: 428
Likes: 0
From: Victoria - Vancouver Island, BC, Canada
Hey buddy. I have no idea. I'm still learning all this stuff!! The car was put together a bit wrong when I got it, so it wouldn't suprise me if it's missing something. I'll take a picture of it tonight.
PS - When are you making the trek to come visit? We're having another big "engine work/bonfire" party again in 6 weeks. Tell your boss you want the time off!
PS - When are you making the trek to come visit? We're having another big "engine work/bonfire" party again in 6 weeks. Tell your boss you want the time off!
Uh, isn't that a drain plug? lol Can't really see but I know some Canton pans have their drain plug on that side
Edit: Just read your entire original post. Hm.. That's odd. Are you sure it wasn't just a bad gasket leak?
Edit: Just read your entire original post. Hm.. That's odd. Are you sure it wasn't just a bad gasket leak?
Thread Starter
TECH Regular
Joined: Jun 2009
Posts: 428
Likes: 0
From: Victoria - Vancouver Island, BC, Canada
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Five Reasons the Camaro Was the Most Pivotal Player in the Pony Car Wars 2.0
Brett Foote
10 Reasons the LS7 Is GM's Most Extreme Naturally Aspirated V8 Engine Ever
Verdad Gallardo
That plug is for an accessory like oil temp sensor. Mine was not tight when it was shipped to me so I pulled it and wrapped it in Teflon and reinstalled it. It uses an alan head right?
Oh yea while it's out I noticed when I pulled all the plugs in these pans that they had weld BB's in the threads so make sure it clean while you have it out and use teflon on that plug and the oil level sensor plug if your not using the sensor.
TECH Regular
Joined: Jun 2009
Posts: 448
Likes: 0
From: new york
i had that pan in my car for about 3 weeks ,it leaked the whole time due to the welds bein shitty . for a quick fix i ran a silicone called THE RIGHT STUFF ,it comes in a cheeze whiz type can . i ran it over the welds after cleanin it very well and let it sit overnight it slowed the leak down quite a bit , end result when i spun a rod bearing i sold the pan to a friend that didnt care about the leak and ran a stock one
