Can this be welded?? 
Can this be welded??
Absolutely not worth risking that in my opinion, I would not try to weld it. You could run into balance issues and if it ever came apart it would do a lot of damage.
Trying to cut corners and save a buck now WILL bite you hard later. Plus if you actually figure the cost of having someone weld it then having it balanced you would have more into it than a new gear lol.
You need PN: 10128349 from GM. You can get it from Summit for 60 bucks
Trying to cut corners and save a buck now WILL bite you hard later. Plus if you actually figure the cost of having someone weld it then having it balanced you would have more into it than a new gear lol.
You need PN: 10128349 from GM. You can get it from Summit for 60 bucks
Absolutely not worth risking that in my opinion, I would not try to weld it. You could run into balance issues and if it ever came apart it would do a lot of damage.
Trying to cut corners and save a buck now WILL bite you hard later. Plus if you actually figure the cost of having someone weld it then having it balanced you would have more into it than a new gear lol.
You need PN: 10128349 from GM. You can get it from Summit for 60 bucks
Trying to cut corners and save a buck now WILL bite you hard later. Plus if you actually figure the cost of having someone weld it then having it balanced you would have more into it than a new gear lol.
You need PN: 10128349 from GM. You can get it from Summit for 60 bucks
__________________
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
I was gonna offer the one I have laying around as well but I wouldn't mix and match used gears with a new chain etc.
I would replace the whole timing set with new. But that's just me
I would replace the whole timing set with new. But that's just me
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
TECH Resident
Joined: Jul 2007
Posts: 749
Likes: 1
From: Spokane, WA
Welding is a bad idea on pretty much anything that rotates, especially at that speed. Even if the weld holds there's pretty much no way it will be properly balanced anymore because the material left from your weld would likely have the same effect as if you put a small weight on it.
As for the gear i couldn't find one anywhere, i dont think the one from summit is splined and i was looking for one locally cuz i didnt want to wait. but this thread worked great and i find someone that has one, Thanks for everyones input
