NON-LS1 454 Cam Help Please!!!!
#1
TECH Apprentice
Thread Starter
iTrader: (1)
Join Date: Jan 2003
Location: Kansas
Posts: 310
Likes: 0
Received 0 Likes
on
0 Posts
Cam Help Please!!!!
I was wondering if going from a solid cam to roller would see much in performance gains???? Running a Lunati solid cam 2500-6500 / 310/320 .558/.566, was going to try Lunati roller 2500-6500 / 304/304 .595/.595 Any estimates on HP gain or 1/4 time gain/mph??? Its a 454 /Ive got a 3500 stall /400 turbo tranny/850 holley/Victor jr single plain intake... Im want to stay in the same rpm range thats why i was going to try this cam.
Thanks....
Thanks....
#2
wrencher
iTrader: (2)
Join Date: Aug 2002
Location: Chicagoland
Posts: 4,762
Likes: 0
Received 0 Likes
on
0 Posts
I'm thinking your gonna lose some with that cam.
Sure it's roller but the basic duration #'s there's a big difference.
Go here lots of info & downloads to help you;
www.racingsecrets.com
Sure it's roller but the basic duration #'s there's a big difference.
Go here lots of info & downloads to help you;
www.racingsecrets.com
#3
Under criminal investigation for fraud
iTrader: (-2)
Join Date: Jan 2004
Posts: 1,350
Likes: 0
Received 0 Likes
on
0 Posts
You will see a gain, not sure how much though. I have seen on the dyno a cam change from a solid flat tappet to a solid roller make as much as 60 hp difference. This was with almost the same duration numbers on both cams. I think that with what you are chosing with these cams, you will still see a gain from the swap.
Thanks,
Thanks,