Have a problem with my LT1 car

Reply Subscribe

Thread Tools

Search this Thread

Oct 17, 2010 | 02:35 AM

#21

1BAD94Z

Thread Starter

Registered User

Joined: Oct 2010

Posts: 26

Likes: 0

From: MO

Quote:

Originally Posted by MattSapp95_T/A

Will it start right back up once it shuts off? Usually if a coil is getting hot it will take a little bit for it to start back up....

If you are already to the opti you may as well replace it....seems that there are a lot of guys using Chandler optis with success..... And they are pretty inexpensive....

It takes a while for it to start back up. So im guessing i should check that coil. I will look into the Chandler optis

Oct 20, 2010 | 02:42 PM

#22

ChandlerMotorsports

FormerVendor

iTrader: (3)

Joined: May 2006

Posts: 187

Likes: 0

From: Wisconsin

If anyone has any O2 test instructions saved or bookmarked, drop them in here. I've been talking to the OP and it seems like a closed loop issue. He tested the wires and coil already from what it seems. He's got an opti coming to. So something is going to get his ride back on the road

Oct 20, 2010 | 03:37 PM

#23

1BAD94Z

Thread Starter

Registered User

Joined: Oct 2010

Posts: 26

Likes: 0

From: MO

Thanks Chandler! This will be greatly appreciated.

Oct 20, 2010 | 05:08 PM

#24

jaycenk

TECH Addict

iTrader: (1)

Joined: Jun 2009

Posts: 2,210

Likes: 1

From: Holiday, FL

Check the fuse box in the engine bay for a fuse location labled engine sensors or sensors. I had this fuse blow on me and it will run fine untill it tries to go into closed loop and the sensors are not showing the PCM anything so it stubles and dies. This is the way it is on my 97 and this circuit suplies power to the o2 sensors to heat them.