robsquikz28

iTrader: (246)

cant program new remote. This guy has a problem with both fobs took a crap on him. He replaced both batteries and still nothing. Well I checked the battery and its good. NExt I pulled the radio fuse and turned key 3x and it locked/unlocked all doors and hatch. BUT the passenger door will not unlock on the 3rd try?? Why I dont know. Even I unlock it manually on the 3rd try and try to set hold both the lock/unlock buttons for 16 secs it will NOT program at all...anyone know why???

Why wont the pass. door unlock on the 3rd try, what is wrong?

THe driver door locks then unlocks and stays unlocked!! Im sure they both need to stay locked! But I can be wrong??

Fobs dont do anything at all!

help asap

robsquikz28

iTrader: (246)

anyone

leadfoot4

iTrader: (1)

It sounds like the fobs lost communication with the car. If I remember correctly, the process is to stand next to the car and hold both the lock and unlock buttons for 10 seconds, or something like that....

robsquikz28

iTrader: (246)

The way you should program it is the way that I stated it to be in the first paragraph!

robsquikz28

iTrader: (246)

any other ideas?

djjab57

iTrader: (17)

My passenger side wont unlock with the remote, I always figured the slider thing was off

robsquikz28

iTrader: (246)

I need this info for programming, not just the remote operation