Lt1 (need help!!)

Reply Subscribe

Thread Tools

Search this Thread

Oct 19, 2011 | 04:04 PM

slow93ta

Thread Starter

Teching In

Joined: May 2004

Posts: 17

Likes: 0

Lt1 (need help!!)

I have a 1993 trans am and I just installed a 2 1/2" True dual set up w/ bullets dumped before the axle, and new poly motor and trans mounts. The problem i,m having is there is a really strong virbration right at 2000 RPMs. It,s smooth from idle all the way to 1900 RPMs and smooth from 2100 all the way to 6000 RPM, but the really vibrates strong exactly at 2000 RPM. Please Help!!!

Oct 19, 2011 | 04:10 PM

RamAir95TA

TECH Senior Member

iTrader: (2)

Joined: May 2005

Posts: 9,467

Likes: 8

From: South Jersey

Check to make sure no exhaust components are rubbing against the body/cross member(s).

Also, does it do it in neutral/park, while driving, or both?

What specifically vibrates?

Oct 19, 2011 | 04:11 PM

djjab57

TECH Addict

iTrader: (17)

Joined: Jul 2007

Posts: 2,496

Likes: 0

From: Texas

Id say its just the new mounts You get more vibs out of them. Over time you will notice it less

Oct 19, 2011 | 04:16 PM

slow93ta

Thread Starter

Teching In

Joined: May 2004

Posts: 17

Likes: 0

It does it while driving and in park/neutral!!!

Oct 19, 2011 | 11:05 PM

jaycenk

TECH Addict

iTrader: (1)

Joined: Jun 2009

Posts: 2,210

Likes: 1

From: Holiday, FL

most likely polly mounts. I'm going back to rubber engine mounts and suspention bushings. polly realy transfers every little vibration or ripple in the road not to mention the pot holes. I hate it for a non track car.

Reply Subscribe