Stock 2.73 to ??
#21
TECH Fanatic
iTrader: (1)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
After reading more of your comments, it's sounding to me like you'd be happiest with the 3.42 gears.
With a stockish engine, there would be very little performance gain stepping up from 3.42 to 3.73.
I have a 3rd Gen F-body with 3.73's, stock engine, and I would prefer 3.42's. It's always operating too far above the engine's torque peak with the 3.73's.
With a stockish engine, there would be very little performance gain stepping up from 3.42 to 3.73.
I have a 3rd Gen F-body with 3.73's, stock engine, and I would prefer 3.42's. It's always operating too far above the engine's torque peak with the 3.73's.
#27
TECH Fanatic
#30
TECH Enthusiast
Thread Starter
Join Date: Feb 2012
Location: Orlando
Posts: 631
Likes: 0
Received 0 Likes
on
0 Posts
#32
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
373's at 75 mph was 3000 rpm
342's at 75 mph are 2500 rpm
My 60" time's are .2 th's better with the 342's but the new relocation bracket's are probably the reason for this but it went from 2.0 60's to 1.8 with stock stall and tranny.I am overly pleased with the ratio
![Grin](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_grin.gif)
#33
On The Tree
iTrader: (11)
Join Date: May 2011
Location: Edgewater FL. but, Jersey for life!
Posts: 174
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
half tank of gas from orlando to daytona? damn. i've got 3:23's in my A4 Trans Am and i can go from edgewater to gainesville on half a tank of gas...
Last edited by Amazin1; 02-18-2012 at 09:01 PM.