ROUDA

iTrader: (1)

near by someone is selling a new 503 cam for a steal. I have a 95 lt1 what bolt ons and pcm4less tune. Wouild this be a good cam to add with the way my car is set up I would retune it but other then that how is this cam for overall power sound and regular driving. thanks

DREAMZ28

iTrader: (1)

You don't get a cam for sound.. That shouldn't be something that should even be a factor when selecting a cam.

ROUDA

iTrader: (1)

its not but any cam sounds better then stock

thanks for the helpful post bro...

96lt1m6

iTrader: (31)

The 503 is a great cam, power is improved across the board.
If you have an a4 you will need a stall(3200-3600) to make the most of this cam, 3.42-3.73s auto or 3.90-4.10s manual....... many people have had great results with the 503.. As far as sound, this cam has a mild thump at idle.

Luke1996ta

iTrader: (3)

It's a great cam sound is also great put a cut out before the cat if u have a cat, and then it sounds pretty mean and you will def feel a change in power. If its auto need stall and gears manual you pry could get out of getting gears but def should get 411.

bufmatmuslepants

iTrader: (3)

If you dont want it, pm me a price that youll sell it to me for.

ROUDA

iTrader: (1)

ok sounds like a good cam. Im going to grab it.

nascarnate326

iTrader: (1)

I want a cam for sound too.

guppymech

iTrader: (7)

I know that's not your only reason. But nothin' beats the grin on your face when you pull up to a light in traffic and people start rolling their windows down to listen to your late model emission controlled car sounding like it has no right sounding.

93 LT1 Vette

My cam is almost the same as the CC503. 220 dur .505 lift 112LSA with 1.5 rockers. On just the cam swap I picked up 32 hp and 23 TQ no other changes. As far as sound goes, it isn't lumpy but you can tell it isn't stock either. TQ is strong all the way through 6000rpm.

FAD2BLK93

If u don't have a stall yet, how sluggish will it be off the line? I kinda think it will be better at traction when u stab it leaving a light. But at the track that is a different story prolly leave what .5 on the table? Am i way off or what? Am almost done with my heads and 503 build but no money for stall, so i was thinking of the RevMax 3600 for like $375 pretty cheap.

Ocala93TA

iTrader: (9)

503 sound with pcm4less tune i love the cam for the extra hp and the sound

http://www.youtube.com/watch?v=pLqVL...ure=plpp_video

F0x Slaughter

GM847 I think is a much meaner sounding cam.

v8vette84

Of course it sounds meaner, it has a higher lift and longer duration. An older grind though.... I loved the 503 I used to have, great great great torque everywhere! Even as low as 1500rpms! And would run to 6k no problem. I also got a combined 24-25 MPG driving it on the highway and through stop and go traffic.. (plus a little bit of fun too)

F0x Slaughter

PS lift doesnt give the sound. Its valve overlap.

nascarnate326

iTrader: (1)

I mean sure I would like a faster car but some people go way overboard worrying about 5 horsepower. I really hate the term "goals"

WTF? Isnt everyone's goal to be badass?

If I could just walk out to my car sounding like this, it would be *******. Old tech or not...sounds awesome.

http://youtu.be/F5ZBNAmx9WM

ROUDA

iTrader: (1)

that is pretty mean

z28tommy

I would love to go with the 503 cam but Idk what springs and rocker arms would be best

F0x Slaughter

Most guys run comp cam 918 springs good up to .650 lift and Comp Pro Magnum 1.6 rockers.

z28tommy

I would love to go with the 503 cam but Idk what springs and rocker arms would be best