Cam advice
Thread Starter
Teching In
Joined: Jan 2004
Posts: 44
Likes: 0
From: Sterling, Virginia
Cam advice Hey guys what's up? I hear you guys talk about the cc306 cam, where can I get this cam and is it emissions friendly??? Also any other advice on a cam that is fairly lopey and emissions friendly would be appreciated. I'm building a 396 LT1, I was going to do a 383, but I just found out that the 396 is just a little bit more that the 383 so I'm gonna go with that. I would like to get 400+ at the wheels, if this is possible please share some info with me.
Nick
Nick
TECH Senior Member
Joined: Jun 2003
Posts: 9,339
Likes: 3
From: NYC metro area
You can get the 306 from pretty much anywhere. Not sure about the parts number, but somebody on here is bound to have it. It is definitely not very emissions friendly, though. Lopey and emissions friendly usually do not belong in the same sentence 
. With a 383 or a 396 you'll definitely be able to achieve 400 at the wheels, but as for how emissions friendly it woudl be, I don't know. If you really need to pass emissions, a stroker setup is the wrong place to look. I would recommend nitrous for you if you really need to pass emissions.
. With a 383 or a 396 you'll definitely be able to achieve 400 at the wheels, but as for how emissions friendly it woudl be, I don't know. If you really need to pass emissions, a stroker setup is the wrong place to look. I would recommend nitrous for you if you really need to pass emissions. 
