Karl Ellwein 383 may be letting this go =(
#1
Karl Ellwein 383 may be letting this go =(
my motor was put together by Karl Ellwein. ESE#33.
Idk if this is the right forum, but this is where us LT1 guys will see something like this. Bottom end has 0 miles on this build. Heads have 2000 miles. What are your thoughts on this? I want a firehawk lol
block:383 factory 4 bolt main
Main and rod bearings coated by swain tech
howards track smart crank balanced by Howards
howards billet rods 6.0"
mahle power pack pistons 12.5:1 compression
heads: advanced inductions 200cc dominator LT1 CNC heads
26120 beehive springs
custom manleysevere duty stainless pro flo valves 2.00i/1.56e
street/strip LTx intake manifold with port matched geometry
custom billetcam 242/246 .584/.584 108lsa
Idk if this is the right forum, but this is where us LT1 guys will see something like this. Bottom end has 0 miles on this build. Heads have 2000 miles. What are your thoughts on this? I want a firehawk lol
block:383 factory 4 bolt main
Main and rod bearings coated by swain tech
howards track smart crank balanced by Howards
howards billet rods 6.0"
mahle power pack pistons 12.5:1 compression
heads: advanced inductions 200cc dominator LT1 CNC heads
26120 beehive springs
custom manleysevere duty stainless pro flo valves 2.00i/1.56e
street/strip LTx intake manifold with port matched geometry
custom billetcam 242/246 .584/.584 108lsa
Last edited by 1slow94z28; 10-16-2012 at 05:58 PM.
#5
I'm undecided on selling it. I don't even know which direction to go. If anything, maybe someone can give me an idea of its value. By the way, whytry, I don't know if your being funny or a douchebag.