How to test injector driver?
#1
On The Tree
Thread Starter
Join Date: Jan 2013
Location: honey brook,pa
Posts: 111
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Hey guys i need to find out my dtc 18 still and its killing me. I looked at all my injector wires they dont look cracked or damaged. Can someone pls help me with my problem.
#2
TECH Veteran
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
You should use a meter to check the integrity of the wires. You can also check the resistance of the injectors (should be ~12 ohms). I would suspect something in the PCM last.
#3
On The Tree
Thread Starter
Join Date: Jan 2013
Location: honey brook,pa
Posts: 111
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
all pink wires have 12v, and all injectors have 12.8 ohms. So i pulled my wire harness out and seperated all of the injector wires from the harness to further inspect cracks or slices in the wire and everything looks good.
Trending Topics
#9
On The Tree
Thread Starter
Join Date: Jan 2013
Location: honey brook,pa
Posts: 111
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I've never used one before and they seem to be pretty expensive. is there any other test I can do to the wiring harness? I think its one of my injector pig tales that are messed up