Bought a 94 with issues.
So this is what its doing. 1st few days it drove good a total of 10 miles I put on this thing. lol but yesterday I took it out after new waterpump, radiator,opti cap, wires,plugs. Drove great. Come to a stop sign and car starts sputtering once I hit the brake. Like a newb driving manual for the 1st time and left the clutch engaged. I turned the car back on put it in gear and it lunged forward and died. Did this numerous times. So I gave it a little gas when putting it in gear and it lunges forward and I give it more gas and takes off from there.
This morning I try again. Idles fine and is creeping forward in drive for about 30 seconds and then lunges forward like the convertor locked Im guessing. I hit the brake the car dies. So I parked it.
All in all if this is something major time to make this car a 6 speed
Do you have a ALDL to USB cable yet? If not get one (or make a USB port on your car - this is $10 I've heard) for ~$50. Then download Gary Doug's Scan9495 (free) and data log that thing! You need to see what exactly is going on.
Or you can throw parts at it. Replace the TCC solenoid, if that doesn't work, replace Tq Converter.
I'd prefer the data logging method, plus if you do get that cable or USB conversion, you can download Tuner Pro RT for free and you can now tune your car too (well you'd still need WinFlash from Tuner CATS, but that's only $20). $70 for data logging, error checking, and tuning is about the price of a chepo OBD2 scanner.....
Personally, if I were replacing my TQ converter, I'd stall it higher and rebuild that trans (hardened sun shell, shift kit, better clutches and steels, upgrade the 3/4 pack to a 7 disc, etc).
So you can data log it?
What brand stall?
Last edited by hrcslam; Aug 12, 2014 at 12:30 PM.
Trending Topics
The Best V8 Stories One Small Block at Time

