daily LT1 build
Thread Starter
Staging Lane
Joined: Nov 2015
Posts: 50
Likes: 0
58mm on a stock automatic
CAI like K&N or if you have a ws6 hood in mind do the Ls1 lid set up it works very well
You need some gear in that car, 3.73s come to mind however, if you find a 3.42 rear from a 6spd car that will work
New valve springs, 1.6 rockers
Underdrive crank pulley
3200-3600 stall with the largest capacity tranny cooler you can find to fit
160° thermostat
And most of all have that pcm tuned....
I personally like the cc503 cam and heads done by someone reputable cough cough LE2s or AI you will not be let down by either..
CAI like K&N or if you have a ws6 hood in mind do the Ls1 lid set up it works very well
You need some gear in that car, 3.73s come to mind however, if you find a 3.42 rear from a 6spd car that will work
New valve springs, 1.6 rockers
Underdrive crank pulley
3200-3600 stall with the largest capacity tranny cooler you can find to fit
160° thermostat
And most of all have that pcm tuned....
I personally like the cc503 cam and heads done by someone reputable cough cough LE2s or AI you will not be let down by either..
Just called and got ahold of Craig. He says he's still really busy and doing a lot of race heads for different classes and doesn't bother advertising. Trying to look for a larger space for his shop at the moment. We chatted for probably a good 10 minutes and he was asking me about my setup and was talking about things he was doing now. The dude is a genuinely great guy. Hands down I'd throw my business his way every time.