H/C/I ....something unconventional
Thread Starter
On The Tree
Joined: Feb 2015
Posts: 159
Likes: 0
I always liked Mike quik95lt1s 8500rpm beast, that is different. It's a 388 with some really high end bottom end pieces to handle that 8500rpm through the traps, shaft mount rockers, but then fairly simple AI ported trickflows. I'd always liked the idea of mikes bottom end with some sb2.2 or Brodix heads, and a tall single plane, just getting away from the limits of LT based heads and taking advantage of the sbc heads. You would have to go to 0.060 over, so block selection is key, since most good sbc heads need a bigger bore.
