Flexplate for 383 stroker
Thread Starter
Staging Lane
Joined: Dec 2016
Posts: 98
Likes: 0
From: Minnesota
Flexplate for 383 stroker so my 383 build is coming together and i am now deciding what stall im gonna be using and while i was thinking about that i thought about my flexplate also.. any suggestions for a better flexplate or will the stock flexplate work? thanks
TECH Veteran
Joined: Apr 2008
Posts: 4,985
Likes: 112
stock will work IF you remove the welded on weight...although I would have a machine shop confirm it is zero balance with the weight removed
Your 383 is very likely "internal" balanced so you would need a "neutral" aka "zero" balanced Flexplate
Nothing wrong with stepping up to a SFI rated flexplate though
confirm with your builder if the motor is now internal balanced
Your 383 is very likely "internal" balanced so you would need a "neutral" aka "zero" balanced Flexplate
Nothing wrong with stepping up to a SFI rated flexplate though
confirm with your builder if the motor is now internal balanced
Thread Starter
Staging Lane
Joined: Dec 2016
Posts: 98
Likes: 0
From: Minnesota
stock will work IF you remove the welded on weight...although I would have a machine shop confirm it is zero balance with the weight removed
Your 383 is very likely "internal" balanced so you would need a "neutral" aka "zero" balanced Flexplate
Nothing wrong with stepping up to a SFI rated flexplate though
confirm with your builder if the motor is now internal balanced
Your 383 is very likely "internal" balanced so you would need a "neutral" aka "zero" balanced Flexplate
Nothing wrong with stepping up to a SFI rated flexplate though
confirm with your builder if the motor is now internal balanced
