6th gear huge problem.
Thread Starter
Teching In
Joined: Mar 2018
Posts: 3
Likes: 0
6th gear huge problem. Every gear minus 6th and reverse are perfect. I have a brand new stg2 clutch. So when I shift into 6th and begin to accelerate the shifter gets thrown around like crazy. I'm thinking the synchros or maybe forks? I'm not sure and need help.
Reverse gear likes to pop out occasionally as well. Thanks for the help!
Reverse gear likes to pop out occasionally as well. Thanks for the help!
Mine was not moving around but was shaking a little and noisy.Then not long after that the bearing on the reverse gear on the mainshaft went out.
Reverse popping out is common,you can flip the synchronizer hub to fix it because it only uses one side of it.
Check and make sure the shifter is not loose and that the shifter cup bushing is in good shape.If they both check out I would suggest having it inspected by a shop or pulling it apart for inspection,parts for the T56 can get expensive fast when it breaks.
Reverse popping out is common,you can flip the synchronizer hub to fix it because it only uses one side of it.
Check and make sure the shifter is not loose and that the shifter cup bushing is in good shape.If they both check out I would suggest having it inspected by a shop or pulling it apart for inspection,parts for the T56 can get expensive fast when it breaks.
Thread Starter
Teching In
Joined: Mar 2018
Posts: 3
Likes: 0
