Scat Ibeam with spray?
Thread Starter
On The Tree
Joined: Sep 2018
Posts: 116
Likes: 1
Scat Ibeam with spray? Finally got my engine to the builder yesterday and he suggested for my build going with Scat light weight Ibeam rods for my set up as I was only doing 150 shot and he thinks hbeams are over kill and would rather me have the weight savings. Its a 383 stroker about 11-11.5 CR and 150 shot of nitrous. Anyone have experience with scat ibeams and nitrous?
Stock pm rods can handle 150 shot so I would assume these I beams can handle at least that.
we had a forged 6.0 with Lunati Pro Mod Rods which were also I beams and it took over a 300 shot with no issues.
we had a forged 6.0 with Lunati Pro Mod Rods which were also I beams and it took over a 300 shot with no issues.
They're awesome rods assuming you're talking about the procomp 4340 ones with the 7/16" bolts. Search around on yellowbullet and speed-talk and you'll find stories of people spinning SBC's over 8k+ making more power than you without issues. You'll be fine.
Thread Starter
On The Tree
Joined: Sep 2018
Posts: 116
Likes: 1
Thread Starter
On The Tree
Joined: Sep 2018
Posts: 116
Likes: 1
never been to those sites. I'll check it out
