Hi,

I am currently rebuilding fully a firebird LT1 for a swap in a 1970 impala
We had a harness and Pcm made by psi conversion, it will only work with a stock specs camshaft.

Unfortunately they seem to be out of stock everywhere...

Please update me if you know where I could source one for this buid. Having the PCM reflashed for a bigger grind is possible but expensive as I am in Europe

Thanks

 

Autozone has a stock grind cam available. Not sure if they ship to Europe though.

 

Try putting up a Wanted AD in the classifieds. You should be able to source a clean used one from somebody doing a cam swap pretty easily, if your not opposed to running a used one. They wear pretty good being factory roller lifters. Or call Comp Cams and they should be able to get you something very close to what your looking for.

 

I might have one left I will have to look. we tossd like 60 stock cams a few years ago