exhaust and intake in
Thread Starter
Teching In
Joined: Apr 2004
Posts: 12
Likes: 0
From: Katy, Tx
exhaust and intake in i have long tubes, 3in x pipe, no cats, bullet mufflers, cai, and emissions delete. how much power gain at the wheels should i get and around where in the 1/4. I was running 14.2 before. I dont know if it helps but i ran an Ls1 SS who runs 13 flat or better and he had me by about 2 1/2 cars
TECH Fanatic
Joined: Sep 2002
Posts: 1,112
Likes: 0
From: BLOOMFIELD, NY
Well unless his car is a dog, He should be running alot better than 13flat in an ls1 !!!!
With your new mods you may only losse by 1 1/2. Assuming he drives **** poor and you drive like a pro.
Dont take my reply the wrong way. I love lt1's. Get some head work done and then you will make up some ground.
Good luck
With your new mods you may only losse by 1 1/2. Assuming he drives **** poor and you drive like a pro.
Dont take my reply the wrong way. I love lt1's. Get some head work done and then you will make up some ground.
Good luck
Launching!
Joined: Nov 2003
Posts: 219
Likes: 0
From: pasadena
gain @ When I had my car stock the best time that I ran was a 14.1 at 100mph. Now that I put on Hooker Long tubes, no cats, and a cut out, I ran a 13.6 at 101mph, I think my mph didnt change too much because when i was runnnig 14.1 I had 275-40-17 not drag radials, and recently when i ran a 13.6 I now have 315-35-17 not drag radials either. Hope this helps. My car is a 6 speed too.
